Fredrik Bajers Vej 5
P.O. Box 159 DK-9100 Aalborg
Phone: +45 9940 9940
20.03.2017 kl. 08.30 - 24.03.2017 kl. 16.00
Associate Professor Zhenyu Yang, email@example.com, Aalborg University
Associate Professor Zhenyu Yang, Aalborg University and Dr. Jie Chen, Brunel University, UK
A Fault-Tolerant Control (FTC) system is referred to a controlled system that poses the capability to accommodate system component faults/failures automatically and is capable of maintaining overall system stability and acceptable performance in the event of such faults. In general, the FTC capability can be possibly achieved through passive or active approaches. The passive FTC is limited by the nominal control system’s robustness, while the active FTC approach often consists of two integrated online functionalities, i.e., Fault Detection and Diagnosis (FDD) and Control Reconfiguration (CR). Thereby, the active FTC is also regarded as a kind of intelligent control solution.
The FTC plays an essential rule in safe-critical systems, which now cover a wide range of engineering systems, from aircrafts, airspace systems and nuclear reactors, to the recent emerging energy systems, such as smart grid systems, offshore wind farms etc. The ultimate objective of applying FTC techniques is to cost-effectively increase engineering system’s reliability, safety availability and maintainability.
The course covers the fundamental essentials and some latest results in FTC research area, along with diverse application case studies. The main content consists of: Historical and technical overview & terminology; FDD techniques (data-driven & model-based); CR techniques (model-matching & model-following): Integration of FDD and CR: fundamental FDD/FTC property analysis and diverse case studies.
The course will be evaluated based on a mini-project after the course. This mini-project expects some illustration that the student can apply some techniques/knowledge learned from this course into their current PhD project.
Lecture notes/slides will be provided and the following two books are recommended:
Jie Chen and R. Patton, “Robust model-based fault diagnosis for dynamic systems”, Kluwer, Boston, 1999.
R. Isermann, “Fault-diagnosis systems: An introduction from fault detection to fault tolerant”, Springer, 2006. ISBN 3-540-24112-4.
Basic knowledge of control theory (incl. state-space methods)
6000 DKK for PhD students outside of Denmark and 1500 DKK for PhD students in Denmark, who are not from AAU. 8000 DKK for the Industry.
Department of Energy Technology
Aalborg University, Esbjerg Campus, Niels Bohrs Vej 8, 6700 Esbjerg
22.05.2018 at 08.30 AM - 24.05.2018 at 04.00 PM
28.05.2018 at 08.30 AM - 01.06.2018 at 04.00 PM
29.05.2018 at 09.30 AM - 29.05.2018 at 04.00 PM
The Department of Energy Technology at Aalborg University will have numerous inventions at Danish IP Fair May 29th 2018 in Copenhagen
29.05.2018 at 11.00 AM - 29.05.2018 at 00.00 PM
29.05.2018 at 01.00 PM - 29.05.2018 at 04.00 PM
31.05.2018 at 10.30 AM - 31.05.2018 at 00.00 PM
11.06.2018 at 02.00 PM - 11.06.2018 at 03.30 PM
14.06.2018 at 08.30 AM - 15.06.2018 at 04.00 PM
18.06.2018 at 08.30 AM - 19.06.2018 at 04.00 PM
18.06.2018 at 10.30 AM - 18.06.2018 at 00.00 PM